15m x 4.8m. Height from Keel to top of Wheelhouse approx 5.8m. The project has full drawings/modelled offset information etc. Designed with crew accommodation. bunks/galley/heads.... read more

Thames Lighter would be ideal to convert to a Houseboat. Generally in good condition but some attention needed to the swim end plates.... read more

Aluminium workboat originally built as a safety and transfer boat. Powered by a GMC 180 6-cylinder engine. Top speed around 25 knots. Open steering position and large forward cabin below deck forward. There is a small toilet compartment in the forward cabin. Hull and engine in very good condition.... read more

Dimensions: LOA 28.65m Beam 7.7m Draught 3.2m max 3.87 Displacement 214tons light 305 tons full load. Description: Just recently out of service this well-maintained tug built in 1966 for the UK ministry of Defence this tug was one of a series of Dog Class tugs produced over a number of years. Powered by two Lister Blackstone ERS8 marine engines (eight cylinder). Twin propellors. 1,320 bhp Speed 12 knots and a range of 2,236 nautical miles (4,000 km) at 10 knots (19 km/h)... read more

108ft Dutch Barge - completely stripped out - complete blank canvas. All steeled over, windows in. There is approx 1240 square feet of accommodation to be had here. She has a MAN 6 cylinder diesel engine, 100 hp. This could be your dream home. Laying Kent. Unfortunately there is no mooring where she is laying. Viewing strictly by appointment. She has been weathered so please ask for updated photos.... read more

Vessel Info Name Helen Class Single Unit Tractor Tug (SUTT) Port Portsmouth Builder Richard Dunston (Hessel) ltd Year of Build 1974 Summary Full range of harbour work; pulling, pushing and side towing of surface ships, barges and berthing aids in confined waters and assisting at sheltered anchorages; Previously operated in category C and D regional waters in and around Portsmouth harbour. Dimensions (m) Length overall (inc. fenders) 22.0 Beam (inc. fenders) 6.4 Depth at side (at half length) 2.6 Weight Light Ship ( dead weight for lifting) 126 ton Cl... read more

Built in 1965 this dumb barge is now up for sale. Beam 19ft. The owner is prepared to shorten this barge for a very reasonable cost. Laying Goole £70,000. This must be sold for houseboat conversion not to be used for commercial purposes.... read more

37.09m X 6.72m X 2.78m Ex Commercial River Barge. Built 1965. Powered by Gardner 8 cylinder engine, 200 bhp. Hold boxed 2006/2007 with new combings. Will carry 320 tonne. Crews accommodation for three. 2 cylinder Lister Generator, 12.5 kva - wired throughout for 240 volts. DFC VHF, HRC Radar. All Safety gear in date. Used between Southampton and the Isle of Wight... read more

Dimensions: Length 6m Width 2.5m Moulded Depth 0.925. Description: Fourteen identical steel pontoons in excellent condition. Approximately four years old. Constructed of two steel tubes fabricated with a wall thickness of 12.5mm to form the pontoon body and connected by webs. Super slide segal fenders on each side. Afloat the rubber fender float just above the water line. It could be possible to increase the freeboard of the pontoons by plating over the underside of the pontoons to make a sealed void to create more buoyancy. Brackets can be fabricated to permanently connect the ponto... read more

Built as a tanker for Cory Tank Lighterage in 1968 by Harkers of Knottingley and converted to a dry cargo barge in 2003. She has a beam of 18ft 6ins. Has only just stopped working collecting and delivering sand and gravel for La Farge hence the reason she is now up for sale. Carries 450 tonne. Crews quarters sleep two quite comfortably and is well equipped with sink and drainer, full size cooker, fridge, cupboards and work surfaces. There are radiators and also a Reflex diesel heater. Sea toilet, wash hand basin and shower are onboard. Wheelhouse with VHF radio, Radar, Joystick and wander lead... read more